Carpet stains are a fact of life. Whether it's a spill from a cup of coffee or a pet accident, stains can happen to the best of us. The good news is that there are ways to remove most carpet stains. The key is to act quickly and to use the right cleaning solution. If a spill becomes a stain, it will be much more difficult to remove.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Poblner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak Solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Vacuum away as much as possible.
Step 2: Loosen remaining material by tapping with a scrub brush or toothbrush. Tap with brush, do not scrub.
Step 3: Vacuum.
Step 4: Apply dry powder cleaner.
Step 5: Tap with brush to work powder into carpet tufts. Do not scrub.
Step 6: Let powder dry 1 hour.
Step 7: Vacuum.
Step 8: Repeat dry powder application if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak Solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners such as.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Blot-finish with weighted pad of towels
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum
... OR:
Step 1: Blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Apply nail polish remover (non-oily type)-use cotton swab to apply to the spill. Don't wet through to carpet backing.
Step 2: Pick up softened materials -use clean white paper towel and push toward the center of the spill to avoid spreading.
Step 3: Repeat above -soften and carefully remove a layer of the spill each time. Haste may spread the stain and/or damage the carpet.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Apply nail polish remover (non-oily type)-use cotton swab to apply to the spill. Don't wet through to carpet backing.
Step 2: Pick up softened materials -use clean white paper towel and push toward the center of the spill to avoid spreading.
Step 3: Repeat above-soften and carefully remove a layer of the spill each time. Haste may spread the stain and/or damage the carpet.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these carpet stain removal guidelines may void your warranty. For more information, please contact your Carpet One retailer.
Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
If you are unable to remove a stain using the above methods, you may need to call a professional carpet cleaner.